GEARBOX REPAIR & MANUFACTURING

Our company can undertake the full repair of any kind of gearbox (angular motion, parallel motion, planetary reducers). First the gearbox is disassembled and inspected to evaluate its damage. Then the client is informed and after an agreement the repair takes place. Repair can be performed either on its internal parts (gears, shafts) or on its shell (bearing seats and bushings). During the assembly of the gearbox the bearings and seals are replaced where necessary.

Also the complete manufacturing of a gearbox can be done based on designs or on a sample.

PRODUCTION SAMPLES

ASUG GEAR REDUCER REPAIR
BUSINESS AREA/CLIENT
ENERGY INDUSTRY PPC S.A. (PUBLIC POWER CORPORATION)

The gear reducer was fully disassembled and the parts were put separately according to the reduction grade. A full check on damages was held, the gearbox shell was cleaned and a detailed measurement of tolerances was performed in all bearing places. The gears of first degree (Bevel gears) and fourth (Herring bone) were manufactured and all bearings and sealants were replaced. After full assembly a check was done on the gears' surface of impression.

GEARBOX AND PULLEY REPAIR FROM SKI LIFT
BUSINESS AREA/CLIENT
KAIMAKTSALAN SKI RESORT

The gearbox was disassembled and apart from the damaged gears in first degree of reduction, there was a significant worn out in the pulley and exit shaft assembly. The damaged gears were manufactured, the pulley’s hole was lathed and the shaft was repaired to the diameter of the pulley.

CONVEYOR GEAR REDUCER 40LAO REPAIR
BUSINESS AREA/CLIENT
ENERGY INDUSTRY PPC S.A. (PUBLIC POWER CORPORATION)

The gearbox was disassembled and after checking, it was found that all bearing places were worn out beyond the allowed tolerances. The gearbox shell was repaired in a boring machine to get the desired tolerances in the bearing places. The gearbox was assembled and painted according to the clients demand.

COIL DEPOSIT GEARBOX
BUSINESS AREA/CLIENT
ENERGY INDUSTRY PPC S.A. (PUBLIC POWER CORPORATION)

Based on an old and broken gearbox shell, a new shell was manufactured along with all the gears and shafts on the inside. The gearbox was assembled and delivered to the client ready for use.

PRODUCTION

Industrial Area of Thessaloniki 570 22 Sindos P.O.BOX 1395 T +30 2310 517182 / +30 2310 523687 E info@frantzis.net © FRANTZIS 2014